Duration Frequency Description
Long beep (1.5 seconds) 3 (every 5 minutes) • The system fan is not functioning.
• The fan module has been removed.
2 • The storage pool is about to reach full capacity.
• The storage pool has reached full capacity.
• A storage pool status error occurred.
• The shared folder is about to reach its full
capacity.
• The shared folder has reached its full capacity.
• A shared folder status error occurred.
• A drive is plugged in or out.
1 • The NAS is powering o.
• The NAS was powered on successfully and is
ready.
Long and short beeps 1 long and 2 short beeps The JBOD expansion unit has been removed.
Powering O the NAS
1. Press Enter or Select.
The panel displays the NAS name and QuTS hero version.
2. Press and hold Enter for two seconds.
The panel displays Main Menu 1. TCP/IP.
3. Press Enter repeatedly until the panel displays Main Menu 5. Shut down.
4. Press and hold Enter.
The NAS powers o.
TS-h1290FX User Guide
Basic Operations 44
To Next Page
Loading...
Need help?
General
