Data and Settings After NAS Migration
Network If the number of network ports or network port specications on
the destination NAS is dierent from the source NAS, the following
network and virtual settings may change and require reconguration:
port trunking, virtual machines, Thunderbolt, and more.
Windows AD conguration Windows AD congurations must be recongured.
Licenses Licenses are not migrated.
Warning
QNAP recommends deactivating licenses on the
source NAS before data migration.
Applications If the destination NAS has less RAM than the source NAS, the following
features and applications might not function: Virtualization Station,
Qsirch, and Snapshots.
Services Only services supported by the destination NAS are available.
Multimedia features Some multimedia features are disabled by default.
Migrating a NAS
Important
Before performing NAS migration, ensure that you understand all requirements and
possible changes after migration.
For details see the following topics:
• NAS Migration Requirements
• Status and Setting Changes After NAS Migration
1. Power o the source NAS and the destination NAS.
2. Remove the drives.
Important
QNAP recommends following the source NAS drive order when installing the drives. Take note
of the drive tray order when removing the drives.
a. Remove the drives from the source NAS.
b. Remove the drive trays from the destination NAS.
3. Install the drives.
a. Install source NAS drives onto the destination NAS drive trays.
b. Insert the drive trays into the destination NAS.
4. Power on the destination NAS.
5. Log on to QuTS hero as an administrator on the destination NAS.
The destination NAS automatically checks for the latest rmware update.
TS-h1290FX User Guide
NAS Migration 46
To Next Page
Loading...
Need help?
General
