QNAP TS-855X - Initializing Quts Hero Using the Cloud Installation Website

12. Select Obtain an IP address automatically (DHCP).
13. Click Next.
14. Review the settings.
15. Click Apply.
A conrmation message appears.
Warning
Clicking Initialize deletes all data on the drive before installing QuTS hero.
16. Click Initialize.
QuTS hero initialization starts. It may take a few minutes to complete the process.
After the initialization, you can click Go to NAS Management to start using QuTS hero and conguring
other settings.
Initializing QuTS hero using the cloud installation website
You can initialize QuTS hero on the cloud installation website, which is designed to help you set up QNAP
devices.
Warning
Initializing QuTS hero deletes all data on the drives. Back up your data before proceeding.
1. Power on the device.
2. Connect the device to the internet.
3. Go to the QNAP Cloud Installation website using one of the following methods:
• On your computer, go to the website dedicated to your region.
• Global: https://install.qnap.com
• China: https://install.qnap.com.cn
• Or scan the QR code on the NAS using a mobile device.
The web page lists all the uninitialized QNAP NAS devices on the local network.
4. Find your NAS from the list and then click Initialize.
Tip
If your NAS is connected to the Internet, you can also go to https://install.qnap.com/set to
enter the Cloud Key printed on the NAS. This allows you to initialize the NAS even if your NAS
and your computer are not on the same network.
The installation wizard opens in the default web browser.
5. Create an account or sign in to myQNAPcloud.
Note
You must return to this page to complete the installation after creating an account.
6. Specify the myQNAPcloud device name for the NAS.
TS-855X User Guide
Installation and Conguration 41