QNAP TS-855X - Viewing Drive Information; Viewing Shared Folders Information

6. Press Select and then Enter to congure the settings.
Button Usage
Enter • Display a conguration screen.
• Move to the next item on a conguration screen.
Select • Move to the next item on a menu.
• Modify a value on a conguration screen.
7. After conguring the settings, press Select repeatedly until the panel displays Network Restart.
Important
If you do not see Network Restart, the system will not save the congured settings.
The system saves the settings.
Viewing drive information
The LCD panel can display the temperature and capacity of each drive installed in the NAS.
1. Press Enter or Select.
The panel displays the NAS name and QuTS hero version.
2. Press and hold Enter for two seconds.
The panel displays Main Menu 1. TCP/IP.
3. Press Enter repeatedly until the panel displays Main Menu 2. Physical disk.
4. Press and hold Enter.
The panel displays the temperature and capacity of the drive in bay 1.
5. Press and hold Select.
Repeat this step as necessary.
The panel displays the temperature and capacity of the next drive.
Viewing shared folders information
The LCD panel can display the name and capacity of each shared folder.
1. Press Enter or Select.
The panel displays the NAS name and QuTS hero version.
2. Press and hold Enter for two seconds.
The panel displays Main Menu 1. TCP/IP.
3. Press Enter repeatedly until the panel displays Main Menu 3. Shared Folders.
4. Press and hold Enter.
The panel displays the name and capacity of the rst shared folder.
5. Press and hold Select.
Repeat this step as necessary.
The panel displays the name and capacity of the next shared folder.
TS-855X User Guide
Basic Operations 47