EasyManua.ls Logo

QNAP TS-h 86 Series - User Manual

QNAP TS-h 86 Series
70 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
TS-hx86
TS-h686
TS-h886
User Guide
Document Version: 5
27/11/2020

Table of Contents

Questions and Answers

  • M
    michaelmartinAug 10, 2025
    What to do if Qfinder Pro or myQNAPcloud is unable to locate the QNAP TS-h 86 during QuTS hero installation?
    • P
      Patricia ParkerAug 10, 2025
      If Qfinder Pro or myQNAPcloud can't find the QNAP Storage during QuTS hero installation, the drives or data may be faulty. To resolve this, power off the NAS, remove all drives, power it back on, locate the NAS using Qfinder Pro or myQNAPcloud, reinsert the drives, and then continue with the QuTS hero installation.
  • J
    Jeanne PetersAug 27, 2025
    What to do if hot-swapping failed drives on QNAP TS-h 86?
    • A
      Amber HamiltonAug 27, 2025
      To replace a failed drive, log in to QuTS hero, navigate to Main Menu > Storage & Snapshots > Storage > Disks/VJBOD, and find the failed drive. Ensure you have a new hard drive with a capacity equal to or greater than the failed one. Then, remove the failed drive from the device, wait about 20 seconds (or until you hear two beeps), take the failed drive out of its tray, put the new drive in the tray, and install the new drive.

QNAP TS-h 86 Series Specifications

General IconGeneral
BrandQNAP
ModelTS-h 86 Series
CategoryStorage
LanguageEnglish

Related product manuals