9. Connect all cables and external attachments.
10. Connect the power cord to the electrical outlet.
11. Power on the NAS.
Replacing Memory Modules
The TS-hX86 series has four memory slots. You can increase the memory capacity of the NAS by upgrading
memory modules. For optimal quad-channel performance, replace memory modules in all four slots at the
same time.
Use only QNAP modules of the same type and capacity to maintain system performance and stability. You
can purchase QNAP memory modules from authorized resellers.
Important
QNAP recommends installing modules in pairs.
• Ensure that all four modules are identical.
• Install the pairs in sequence and follow the assigned slots for each pair.
•
For details on slot numbering, see Right Panel.
Module Pair Slot Number
First pair Slots 1 and 3
Second pair Slots 2 and 4
Warning
• Observe electrostatic discharge (ESD) procedures to avoid damage to components.
TS-hx86 User Guide
Installation and Configuration 35
To Next Page
Loading...
Need help?
General
