ARMING
QOLSYS CONFIDENTIAL AND PROPRIETARY PAGE 9 OF 32
© Last updated 11/23/15 All rights reserved
ARMING
The first icon on the home screen is used for arming and disarming.
PRESS TO ARM
The green “unlocked” icons means your system is
currently disarmed and ready to arm and will
coincide with a “System Ready” message in the
Header/Status Bar. Touching this icon will provide
you with two arming modes and several optional
ARM STAY
Arming in “Stay” mode indicates that people will
remain inside the home while the system is armed.
Devices such as the IQ Motion and the Image Sensor
may not be activated in this mode. We encourage
users to activate this regularly, especially as they
retire for the evening.
ARM AWAY
Arming in “Away” mode indicates that the home will
be vacant while the system is armed. All devices,
including the IQ Motion and the Image Sensor will be
activated in this mode. We encourage users to
activate this whenever they leave the home.
FIND IT
ARMING OPTIONS
COUNTDOWN TIMER
EXIT SOUNDS
The panel beeps as the
arming timer counts down.
You can silence these beeps
before you choose an
arming type.
NEED MORE TIME?
Extend the exit delay by either touching
the +60 or by re entering your home if
you had forgotten something.
ENTRY DELAY
The panel will give you time
to disarm once a “delay door”
has been opened. Turn this
off with a touch.
BYPASS
Bypass sensors easily by checking the buttons next to the sensor name on
the right side of the screen. The panel shows you the status of each device
for easy reference and open sensors pop to the top of the list.
When you arm “Away” a timer will
appear, giving you time to leave the
home before the system is activated.
To Next Page
Loading...
Need help?
General
