QRS 80308s - Controller Unit3 LED Status; Controller Unit3 Button Functions

QRS PNO
3
User Guide
QRS Music Technologies, Inc.
Technical Support - 800-247-6557
www.qrsmusic.com
Unit3 LED
Mode Precedence Meaning
2 Flash Per Sec Network Stac IP with Connecon
1 Flash Per Sec Network Client with Connecon
Solid Standalone Server with Connecon
Off No Network Connecon
Unit3 Buon
Operaon Funcon Requirement
Press Announce IP Prompt
Pressed for > 2 seconds (release) Change network mode
Hold for 8 seconds Power off unit
Press when off (to Start up) Reboot
Pressed for > 2 seconds Volume Decrease If Playing
Pressed for < 2 seconds Go to Next Track If Playing
Hold 1 and 3 on Power Up Factory Reset On Boot Up
Proc Light 3 then light 1 then you can let go
Mode Precedence Meaning
Blink 70/30 Major Error( failed soware patch?)
"Rapid" Flash (3 flashes a second on all.) Updang soware
Rapid Flash (3 flashes a second Scrolling through each.) Boot Up (Not Ready Yet)
All LEDs
PNO3 Controller - Buttons and Lights
11