QRS PNO
3
User Guide
QRS Music Technologies, Inc.
Technical Support - 800-247-6557
www.qrsmusic.com
IR Remote Basics
1. If the remote has batteries the remotes lights will light up
when a button is pushed.
2. To select menu items highlighted in black: Push the Shift
Button (then let go) Select the option you would like.
3. The upper right red LED will light up when transmitting a
signal.
4. The button on the PLx is the IR receiver.
5. The top two rows represent the source you would like to
play from.
6. The second set of rows represent volume controls.
7. Transport Buttons are the lower two rows of buttons
Stop—Play—Pause– next track—back– record.
8. Controls including On/O are discreet allowing for learner
remotes and misc. home integration.
9. To change the system from Stand Alone to Network select
“Shift” then “B”
10. To change the system from Network to Stand Alone select
“Shift” then “A”
11. Playlists you create are automatically numbered so
selecting PList then a number will cue that list.
12. Setting your default playlist on startup will also be assigned
as your demo playlist.
13. Radio will cue up the last radio station you had set
IR Remote Basics
9
To Next Page
Loading...
Need help?
General
