QRS 80308s - Operating Mode;Source LED (LED 4); MIDI Activity & Record Status LED (LED 5); System & Voice Prompt Status LED (LED 6)

QRS PNO
3
User Guide
QRS Music Technologies, Inc.
Technical Support - 800-247-6557
www.qrsmusic.com
1 2 3 4 5 6
Operating Mode/
Source
4
Green Solid Internal Memory is Source of Content
Green Blink
1 Blink (per second?): External SD Card as Source
2 Blinks: Recorded Files are the Source
3 Blinks: When an External USB Stick is the Source
Amber Solid External Source is Bluetooth
Amber Blink
1 Blink (per second?): MIDI IN Network
2 Blinks: External: MIDI IN USB Client or 5 Pin MIDI In
3 Blinks: External: Analog MIDI In from Audio Port
Red Solid
Error Selecting Playlist or Source - stays red until you change
source or clear the error.
Red/color Blink ue with one of the above color dependent
MIDI Activity &
Record Strip Status
5
Green Solid PNOscan record sensor strip is installed and detected
Green Blink MIDI activity is coming in o of the PNOscan strip
Amber Solid 5 Pin or USB MIDI Record system is installed
Amber Blink MIDI activity is coming in o of the record system
Red Solid NA
Red Blink NA
System and Voice
prompt status
6
Green Solid Analog MIDI is being decoded
Green Blink The system is updating
Amber Solid NA
Amber Blink The Voice Prompts are active
Red Solid NA
Red Blink NA
Pin Light Port Extender (PLx) LED Light Status and Start Up
8