QSC K10.2 Mounting Quick Start Guide

EN
5
TD-000524-00-A
Side to Side
Refer to Figure 4
1. Remove two yoke-mount-point
covers (1) from the sides of the
loudspeakerenclosure.
2. Insert the M8 - 35 mm button-head
screw (2) through the flat washer (3),
yoke bracket (4), rubber spacer (5),
and mounting adapter (6).
3. Position the mounting adapter (6) so
that the arrow is pointing towards the
front of the loudspeaker.
4. Thread the M8 - 35 mm button-head
screw (2) into the mounting point on
the side of theloudspeaker.
5. Repeat the procedure for the other side.
6. Use a 5 mm hex key to tighten both
screws. Do not overtighten.
— Figure 4 —
2
3
4
6
5
1
6
FRONT
© 2017 QSC, LLC. All rights reserved. QSC and the QSC logo are registered trademarks of QSC, LLC in the U.S. Patent and Trademark office and other countries. All other
trademarks are the property of their respective owners.
http://patents.qsc.com.
Mailing Address
QSC, LLC
1675 MacArthur Boulevard
Costa Mesa, CA
92626-1468 USA
Telephone Numbers
Main Number:
(714) 754-6175
Sales & Marketing:
(714) 957-7100
(800) 854-4079
Toll free (USA only)
Customer Service:
(714) 957-7150
(800) 772-2834
Toll free (USA only)
Facsimile Numbers
Sales & Marketing FAX:
(714) 754-6174
Customer Service FAX:
(714) 754-6173
World Wide Web
www.qsc.com
E-mail
info@qsc.com
service@qsc.com

QSC K10.2 Specifications

General

Amplifier class	D
Recommended amplifier power (max)	1800 W
Recommended amplifier power (min)	225 W
Amplifier/receiver input interface type	3.5 mm jack, XLR
Package weight	17600 g
Frequency range	50 - 20000 Hz
RMS rated power	- W
AC input voltage	100 - 240 V
Power source type	AC
AC input frequency	50 - 60 Hz
AirPlay	No
AC (power) in	Yes
Connectivity technology	Wired
Display	1.75\
Transducer material	Titan
Certification	CE, WEEE, UL, China RoHS, RoHS II, FCC B
Product color	Black
Housing material	Acrylonitrile butadiene styrene (ABS)
Recommended usage	Universal
Audio output channels	1.0 channels
Multi-Room Streaming (MRS) support	-
Speaker type	2-way
Number of drivers	2
Speaker placement	Floor
Speaker interface type	XLR

Weight and Dimensions

Depth	300 mm
Width	320 mm
Height	519 mm
Weight	14500 g