24
TECHNISCHE DATENSPECIFICATIONS SPÉ CIFICATIONS ESPECIFICACIONES
PowerLight 6.0
PFC
PowerLight 9.0
PFC
CONTROL & MONITOR PARAMETERS
(via QSControl) Control:
on/standby; individual channel gain, mute, and polarity
Monitor:
input level; output level; heat sink temperature; output load sense (voltage, current, and relative phase); clip & protect detect;
operating mode (stereo, parallel, bridge) sense
COOLING Four continuously variable speed fans, back-to-front air flow
AMPLIFIER PROTECTION Full short circuit, open circuit, thermal, ultrasonic, and RF protection
Stable into reactive or mismatched loads
LOAD PROTECTION Turn-on/turn-off muting, DC-fault power supply shutdown
OUTPUT CIRCUIT TYPE Quasi-complementary MOSFET output with multi-step high efficiency circuit
WEIGHT Net: 59 lbs (26.8 kg); shipping: 69 lbs (31.4 kg)
POWER REQUIREMENTS 100, 120, 220-240 VAC, 50/60 Hz
eldI lacipyT
1
lluF
2
xaM
3
8
ΩΩ
Ω
ΩΩ
A1.2A01A91A14
4
ΩΩ
Ω
ΩΩ
A1.2A61A13A27
2
ΩΩ
Ω
ΩΩ
A1.2A02A34A39
1
1/8 power with pink noise represents typical program with occasional clipping.
2
1/3 power with pink noise represents severe program with heavy clipping.
3
Continuous sine wave at 1% clipping.
POWER CONSUMPTION NOTES
POWER CONSUMPTION
@ 120 VAC
(both channels driven)
Multiply currents by 0.5 for 230V units
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
To Next Page
Loading...
