Need help?Do you have a question about the QSC Q-SYS Core 110 Series and is the answer not in the manual?
General| Network | Dual Gigabit Ethernet |
|---|---|
| Power Supply | 100-240V AC, 50-60Hz |
| GPIO | 8 |
| Supported Sample Rates | 48 kHz |
| Mounting | 1RU |
Warning regarding the non-rechargeable lithium battery, its chemical properties, and risks of explosion.
Information on FCC compliance, interference, and Part 68/ACTA requirements for telephone connections.
Technical specifications for Industry Canada compliance, including Ringer Equivalence Number (REN).
Statement on compliance with European and China RoHS directives regarding hazardous substances.
Instructions for mounting the Core 110 Series unit in a standard rack-mount unit, including clearance requirements.
Description of the front panel components for the Core 110f model, including OLED display and buttons.
Description of the front panel components for the Core 110f v2 model, including Power and ID LEDs and buttons.
Details on rear panel audio input/output connectors (Mic/Line, Flex) and GPIO Euro connectors.
Overview of rear panel communication ports (Telephone, RS232, HDMI, LAN) and power inputs.
Explanation of 3-pin, color-coded Euro connectors for Mic/Line inputs, Flex Channels, and Mic/Line outputs.
Cautionary note regarding proper insertion of connectors to avoid straddling two channels.
Guide to connecting telephone, power, RS232, USB, and network (RJ45) cables to the unit.
Explanation of the Design Status display (Device, Design, Status) and its possible states on the front panel.
Details on firmware version, chassis temperature, and fan speed reported by the system.
Information regarding LAN A and LAN B network settings, including IP address, Net Mask, and Gateway.
Status indicators for input channels: Mute, Clip, Signal, and +48V phantom power.
Status indicators for output channels: Mute, Clip, and Signal.
List of regulatory compliance standards and certifications for the Core 110 Series products.
Information on accessing the QSC knowledge base, software downloads, and customer support contacts.
Details on how to obtain a copy of the QSC Limited Warranty statement.
To Next Page
