QTech QSW-2800 series User Manual

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
217
pool mode.
no option 60
Delete the configured option 60 in the address pool mode.
no option 43
Delete the configured option 43 in the address pool mode.
30.3 DHCPv6 option 60 and option
43 Example
Typical DHCP option 60 and option 43 topology
Fit AP obtains IP address and option 43 attribute by DHCP server to send unicast discovery
request for wireless controller. DHCP server configures option 60 matched with the option 60
of fit ap to return option 43 attribute to FTP AP.
Configuration procedure:
# Configure DHCP server
router(config)#ip dhcp pool a
router (dhcp-a-config)#option 60 ascii AP1000
router (dhcp-a-config)#option 43 ascii 192.168.10.5,192.168.10.6
30.4 DHCP option 60 and option 43
Troubleshooting
If problems occur when configuring DHCP option 60 and option 43, please check whether the
problem is caused by the following reasons:
Check whether service dhcp function is enabled
If the address pool configured option 60, check whether it matches with the option 60 of the
packets

QTech QSW-2800 series Specifications

General

Brand	QTech
Model	QSW-2800 series
Category	Switch
Language	English