QTech QSW-2800 series User Manual

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
78
Customer Service Provider Customer
CE
PE
802.1ah OAMPDU
802.3ah
Ethernet in
the First Mile
Typical OAM application topology
11.2 EFM OAM Configuration
EFM OAM configuration task list
1. Enable EFM OAM function of port
2. Configure link monitor
3. Configure remote failure
Note: it needs to enable OAM first when configuring OAM parameters.
1. Enable EFM OAM function of port
Command
Explanation
Port mode
ethernet-oam mode {active | passive}
Configure work mode of EFM OAM, default is
active mode.
ethernet-oam
no ethernet-oam
Enable EFM OAM of port, no command disables
EFM OAM of port.
ethernet-oam period <seconds>
no ethernet-oam period
Configure transmission period of OAMPDU
(optional), no command restores the default
value.
ethernet-oam timeout <seconds>
no ethernet-oam timeout
Configure timeout of EFM OAM connection, no
command restores the default value.

QTech QSW-2800 series Specifications

General

Brand	QTech
Model	QSW-2800 series
Category	Switch
Language	English