QTech QSW-2800 series - Page 93

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
79
2. Configure link monitor
Command
Explanation
Port mode
ethernet-oam link-monitor
no ethernet-oam link-monitor
Enable link monitor of EFM OAM, no command
disables link monitor.
ethernet-oam errored-symbol-period
{threshold low <low-symbols> |
window <seconds>}
no ethernet-oam errored-symbol-
period {threshold low | window }
Configure the low threshold and window period
of errored symbol period event, no command
resotores the default value. (optional)
ethernet-oam errored-frame-period
{threshold low <low-frames> | window
<seconds>}
no ethernet-oam errored-frame-period
{threshold low | window }
Configure the low threshold and window period
of errored frame period event, no command
resotores the default value.
ethernet-oam errored-frame
{threshold low <low-frames> | window
<seconds>}
no ethernet-oam errored-frame
{threshold low | window }
Configure the low threshold and window period
of errored frame event, no command resotores
the default value. (optional)
ethernet-oam errored-frame-seconds
{threshold low <low-frame-seconds> |
window <seconds>}
no ethernet-oam errored-frame-
seconds {threshold low | window }
Configure the low threshold and window period
of errored frame seconds event, no command
resotores the default value. (optional)