QTech QSW-2800 series - Page 235

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
221
ipv6 dhcp relay subscriber-id option
no ipv6 dhcp relay subscriber-id option
This command enables the switch relay to
support the option 38, the no form of this
command disables it.
ipv6 dhcp relay remote-id delimiter WORD
no ipv6 dhcp relay remote-id delimiter
Configures user configuration options to
generate remote-id. The no command restores
to its original default configuration, i.e.
enterprise number together with vlan MAC.
ipv6 dhcp relay subscriber-id select (sp |
sv | pv | spv) delimiter WORD (delimiter
WORD |)
no ipv6 dhcp relay subscriber-id select
delimiter
Configures user configuration options to
generate subscriber-id. The no command
restores to its original default configuration, i.e.
vlan name together with port name.
Layer3 Interface configuration mode
ipv6 dhcp relay remote-id <remote-id>
no ipv6 dhcp relay remote-id
This command is used to set the form of
adding option 37 in received DHCPv6 request
packets, of which <remote-id> is the content of
remote-id in user-defined option 37 and it is a
string with a length of less than 128. The no
operation restores remote-id in option 37 to
enterprise-number together with vlan MAC
address.
ipv6 dhcp relay subscriber-id <subscriber-
id>
no ipv6 dhcp relay subscriber-id
This command is used to set the form of
adding option 38 in received DHCPv6 request
packets, of which <subscriber-id> is the
content of subscriber-id in user-defined option
38 and it is a string with a length of less than
128. The no operation restores subscriber-id in
option 38 to vlan name together with port
name such as "Vlan2+Ethernet1/2".
3. Dhcpv6 server option basic functions configuration
Command
Description
Global mode
ipv6 dhcp server remote-id option
no ipv6 dhcp server remote-id option
This command enables DHCPv6 server to
support the identification of option 37, the no
form of this command disables it.
ipv6 dhcp server subscriber-id option
no ipv6 dhcp server subscriber-id option
This command enables DHCPv6 server to
support the identification of option 38, the no
form of this command disables it.