EasyManuals Logo

QTech QSW-2800 series User Manual

QTech QSW-2800 series
415 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #262 background imageLoading...
Page #262 background image
+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
248
ip igmp snooping vlan <vlan-id> mrouter-
port learnpim
no ip igmp snooping vlan <vlan-id>
mrouter-port learnpim
Enable the function that the specified VLAN
learns mrouter-port (according to pim packets),
the no command will disable the function.
ip igmp snooping vlan <vlan-id> mrpt
<value >
no ip igmp snooping vlan <vlan-id> mrpt
Configure this survive time of mrouter port.
The no ip igmp snooping vlan <vlan-id>
mrpt” command restores the default value.
ip igmp snooping vlan <vlan-id> query-
interval <value>
no ip igmp snooping vlan <vlan-id> query-
interval
Configure this query interval. The no ip igmp
snooping vlan <vlan-id> query-interval
command restores the default value.
ip igmp snooping vlan <vlan-id>
immediately-leave
no ip igmp snooping vlan <vlan-id>
immediately-leave
Enable the IGMP fast leave function for the
specified VLAN: the no ip igmp snooping
vlan <vlan-id> immediate-leave command
disables the IGMP fast leave function.
ip igmp snooping vlan <vlan-id> query-
mrsp <value>
no ip igmp snooping vlan <vlan-id> query-
mrsp
Configure the maximum query response
period. The no ip igmp snooping vlan
<vlan-id> query-mrsp command restores to
the default value.
ip igmp snooping vlan <vlan-id> query-
robustness <value>
no ip igmp snooping vlan <vlan-id> query-
robustness
Configure the query robustness. The no ip
igmp snooping vlan <vlan-id> query-
robustnesscommand restores to the default
value.
ip igmp snooping vlan <vlan-id>
suppression-query-time <value>
no ip igmp snooping vlan <vlan-id>
suppression-query-time
Configure the suppression query time. The no
ip igmp snooping vlan <vlan-id>
suppression-query-time command restores
to the default value.
ip igmp snooping vlan <vlan-id> static-
group <A.B.C.D> [source <A.B.C.D>]
interface [ethernet | port-channel]
<IFNAME>
no ip igmp snooping vlan <vlan-id> static-
group <A.B.C.D> [source <A.B.C.D>]
interface [ethernet | port-channel]
<IFNAME>
Configure static-group on specified port of the
VLAN. The no form of the command cancels
this configuration.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the QTech QSW-2800 series and is the answer not in the manual?

QTech QSW-2800 series Specifications

General IconGeneral
BrandQTech
ModelQSW-2800 series
CategorySwitch
LanguageEnglish

Related product manuals