+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
number of user accessing the network, they can enable it. If the number limitation function of
MAC address can not be configured, please check whether Spanning-tree, dot1x, TRUNK is
running on the switch and whether the port is configured as a MAC-binding port. The number
limitation function of MAC address is mutually exclusive to these configurations, so if the users
need to enable the number limitation function of MAC address on the port, they should check
these functions mentioned above on this port are disabled.
If all the configurations are normal, after enabling the number limitation function of MAC in
Port, users can use debug commands to debug every limitation, check the details of number
limitations and judge whether the number limitation function is correct. If there is any problem,
please sent result to technical service center.
To Next Page
Loading...
Need help?
General
