+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
Switch(config)#ipv6 security-ra enable
Switch(Config-If-Ethernet1/2)# ipv6 security-ra enable
45.4 IPv6 Security RA
Troubleshooting Help
The function of IPv6 security RA is quite simple, if the function does not meet the expectation
after configuring IPv6 security RA:
Check if the switch is correctly configured.
Check if there are rules conflicting with security RA function configured on the switch, this kind
of rules will cause RA messages to be forwarded.
To Next Page
Loading...
Need help?
General
