QTech QSW-2800 series - Page 343

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
329
no mac-authentication-bypass enable
function.
Port Mode
mac-authentication-bypass enable
no mac-authentication-bypass enable
Enable the port MAB authentication
function.
2. Configure MAB authentication username and password
Command
Explanation
Global Mode
mac-authentication-bypass username-format
{mac-address | {fixed username WORD
password WORD}}
Set the authentication mode of MAB
authentication function.
3. Configure MAB parameters
Command
Explanation
Port Mode
mac-authentication-bypass binding-limit <1-
100>
no mac-authentication-bypass binding-limit
Set the max MAB binding-limit of the port.
Global Mode
mac-authentication-bypass timeout offline-
detect (0 | <60-7200>)
no mac-authentication-bypass timeout
offline-detect
Set offline detection interval.
mac-authentication-bypass timeout quiet-
period <1-60>
no mac-authentication-bypass timeout quiet-
period
Set quiet-period of MAB authentication.
mac-authentication-bypass timeout stale-
period <0-60>
no mac-authentication-bypass timeout stale-
period
Set the time that delete the binding after the
port is down.
mac-authentication-bypass spoofing-garp-
check enable
no mac-authentication-bypass spoofing-
garp-check enable
Enable the spoofing-garp-check function,
MAB function will not deal with spoofing-
garp any more; the no command disables
the function.
authentication mab {radius | none}
no authentication mab
Configure the authentication mode and
priority of MAC address, the no command
restores the default authentication mode.