+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
Enable or disable SAVI function
savi enable
no savi enable
Enable the global SAVI function, no command
disables the function.
Enable or disable application scene function for SAVI
savi ipv6 {dhcp-only | slaac-only | dhcp-
slaac} enable
no savi ipv6 {dhcp-only | slaac-only | dhcp-
slaac} enable
Enable the application scene function for
SAVI, no command disables the function.
Configure SAVI binding function
savi ipv6 check source binding ip <ip-
address> mac <mac-address> interface <if-
name> {type [slaac | dhcp] lifetime
<lifetime> | type static}
no savi ipv6 check source binding ip <ip-
address> interface <if-name>
Configure a static or dynamic binding
manually, no command deletes the configured
binding. This command may be configured in
a global function of savi enable, slaac-only
enable, dhcp-only enable or dhcp-slaac
enable.
Configure the global max-dad-delay for SAVI
savi max-dad-delay <max-dad-delay>
no savi max-dad-delay
Configure the max lifetime period of SAVI
binding at DETECTION state, no command
restores the default value.
Configure the global max-dad-prepare-delay for SAVI
savi max-dad-prepare-delay <max-dad-
prepare-delay>
no savi max-dad-prepare-delay
Configure the max redetection lifetime
period for SAVI binding, no command
restores the default value.
To Next Page
Loading...
Need help?
General
