+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
lldp mode
(send|receive|both|disable)
Configure the operating state of port LLDP.
4. Configure the intervals of LLDP updating messages
lldp tx-interval <integer>
no lldp tx-interval
Configure the intervals of LLDP updating messages
as the specified value or default value.
5. Configure the aging time multiplier of LLDP messages
lldp msgTxHold <value>
no lldp msgTxHold
Configure the aging time multiplier of LLDP
messages as the specified value or default value.
6. Configure the sending delay of updating messages
lldp transmit delay <seconds>
no lldp transmit delay
Configure the sending delay of updating messages
as the specified value or default value.
7. Configure the intervals of sending Trap messages
lldp notification interval
<seconds>
no lldp notification interval
Configure the intervals of sending Trap messages
as the specified value or default value.
8. Configure to enable the Trap function of the port
lldp trap <enable|disable>
Enable or disable the Trap function of the port.
9. Configure the optional information-sending attribute of the port
lldp transmit optional tlv
[portDesc] [sysName] [sysDesc]
Configure the optional information-sending attribute
of the port as the option value of default values.