Qtx QR10PA Manual

5 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

QR10PA

Portable PA

Item ref: 178.840UK

User Manual

Version 2.0

Table of Contents

Other manuals for Qtx QR10PA

User Manual9 pages

Questions and Answers:

M
Mikayla RamirezJul 30, 2025
What to do if Qtx QR10PA Speakers power LED is lit but there is no media player output?
- J
  Jacqueline MillsJul 31, 2025
  If your Qtx Speakers have power LED lit but no media player output, ensure that your USB or SD card contains compressed audio files and is correctly connected. Try pressing the MODE button, then Play/Pause. In FM tuner mode, make sure a station is tuned in. Also, verify that the VOLUME isn't turned down, and check the LCD display for moving numbers. If needed, press and hold the 'VOL +' button.
M
Michael TerrellAug 4, 2025
How to troubleshoot Qtx QR10PA with no output and no LEDs lit?
- T
  Tony HebertAug 5, 2025
  If your Qtx Speakers have no output and no LEDs are lit, first, check that the POWER switch is on. Next, ensure the battery is not fully drained. If not running on battery, verify the 12Vdc adapter is connected. Finally, check if the internal fuse has blown.
D
Douglas HolmesAug 9, 2025
Why Qtx Speakers power LED is lit but there is no VHF output?
- A
  Arthur WarnerAug 9, 2025
  If your Qtx Speakers power LED is lit but there's no VHF output, check the 9V batteries in the beltpack transmitter and ensure the beltpack transmitter is fully switched on and not muted. Also, make sure the volume is turned up on the beltpack transmitter. Verify that the VHF POWER is switched on and the MIC VOLUME on the QR10PA is not turned down. Finally, check if the RF LED is lit; if not, check the transmitter frequency.
J
jasonsmithAug 14, 2025
What to do if Qtx QR10PA power LED is lit but there is no sound from external inputs?
- I
  Ian SextonAug 15, 2025
  If your Qtx Speakers have power LED lit but no sound from external inputs, check that the leads are OK and properly connected. Ensure the volume and on/off switch on the external mic or line source are correctly set. Verify the VOLUME or MIC VOLUME control is not fully down. In AUX mode, press Play/Pause to ensure the input is not muted.
W
William SmithAug 20, 2025
Why does the music level keep cutting out on my Qtx QR10PA Speakers?
- D
  Darryl ChavezAug 20, 2025
  If the music level is off or keeps cutting out on your Qtx Speakers, check that VCV is not switched on, as it will mute the audio upon receiving a microphone signal.
K
Kristen DavisAug 25, 2025
What to do if Qtx Speakers power LED is lit but there is no VHF output?
- H
  heather21Aug 26, 2025
  If the power LED is lit but there is no VHF output from your Qtx Speakers, try the following: * Check the AA batteries in the beltpack transmitter. * Ensure the beltpack transmitter is fully switched on and not muted. * Make sure the volume is turned up on the beltpack transmitter. * Check that the VHF POWER is switched on. * Check that the MIC VOLUME is not turned down on the QR10PA. * Check if the RF LED is lit (if not, check the transmitter frequency).

Qtx QR10PA Specifications

General

Type	Portable PA Speaker
Power Output (RMS)	50W
Woofer Size	10 inch
Weight	11.4kg
Line output	RCA
Power Supply	230Vac, 50Hz
HF driver	1 inch
Wireless microphone frequencies	174.1 MHz
Controls	Volume, Echo
Inputs	XLR, 1/4", 3.5mm, RCA
Tweeter Size	1 inch
Sensitivity	95 dB
Connectors	6.3mm jack, RCA, 3.5mm jack

Related product manuals

Preview: Qtx QR10PABT

Preview: Qtx QR12PA

Preview: Qtx QRPA

Preview: Qtx QX05PA

Preview: Qtx BUSKER-12

Preview: Qtx PAV8-UHF

Preview: Qtx MIXCAB-15