Qtx QR10PABT - User Manual

5 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

QR8PABT, QR10PABT

Portable PA

Item ref: 178.838UK, 178.839UK

User Manual

Version 1.2

Caution: Please read this manual carefully before operating

Damage caused by misuse is not covered by the warranty

Questions and Answers

C
Cesar ClarkAug 11, 2025
What to do if the power LED is lit but there is no media player output on my Qtx Speakers?
- C
  carrie59Aug 11, 2025
  If the power LED is on but you're not getting any sound from the media player on your Qtx Speakers, here are a few things to check: * Make sure your USB or SD card has mp3 or wma files stored on it. * Verify the USB or SD is properly connected. * Try pressing the MODE button, then the Play/Pause button. * If you're in FM tuner mode, make sure a station is correctly tuned in. * Ensure the VOLUME isn't turned all the way down. * Press and hold the “VOL +” button. * Check the LCD display to see the track countdown.
C
Christian PerezAug 18, 2025
Why is there no sound from external inputs on my Qtx QR10PABT even though the power LED is on?
- J
  Jay WeaverAug 18, 2025
  If the power LED is lit but you're not getting any sound from external inputs on your Qtx Speakers, consider the following: * Check that the leads are in good condition and properly connected. * Verify the volume and on/off switch on the external microphone or line source are correctly set. * Make sure that the VOLUME or MIC VOLUME control is not turned completely down.
J
Jason OneillAug 27, 2025
How to fix Qtx Speakers with no output and no LEDs lit?
- H
  hahnanthonyAug 27, 2025
  If your Qtx Speakers have no output and no LEDs are lit, try the following: * Ensure the POWER switch is turned on. * Check that the battery is not completely drained. * If not using battery power, verify the 15Vdc adapter is connected. * Inspect the internal fuse to see if it has blown.
J
Juan ThomasSep 2, 2025
What to do if the power LED is on but there is no VHF output from my Qtx QR10PABT Speakers?
- J
  John HarrisSep 3, 2025
  If the power LED is lit on your Qtx Speakers, but there's no VHF output, try these steps: * Check the AA batteries in the handheld transmitter. * Ensure the handheld transmitter is fully switched on and not muted. * Verify the VHF POWER is switched on. * Check if the RF LED is lit (if not, check the transmitter frequency).

Qtx QR10PABT Specifications

General

Bluetooth	Yes
Weight	7.8 kg
Battery Life	Up to 8 hours
Bluetooth Version	4.2
Playback Time	Up to 8 hours
Type	Portable PA Speaker
Speaker Size	10 inch
Power Supply	Rechargeable Battery
Signal-to-Noise Ratio	≥75dB
Input Voltage	220-240Vac 50/60Hz

Related product manuals

Preview: Qtx QR10PA

Preview: Qtx QR12PA

Preview: Qtx QRPA

Preview: Qtx QX12A

Preview: Qtx QX05PA

Preview: Qtx QX15PA Plus

Qtx QX15PA Plus

Preview: Qtx BUSKER-12

Preview: Qtx PAV8-UHF

Preview: Qtx MIXCAB-15