quadient IS-280 Guide

6. Reconnect the power supply cable to the rear of the base and power on.
After a few seconds the system will power up.
Now follow the screens in this document and on the user panel to complete the
swap process.
7. The default connection is LAN however if you want to use another type,
please login to Supervisor , select Communication Settings and then Postal Server
Access.
1
7
| Page 7 | Jun-01-2015 05:11 |

quadient IS-280 Specifications

General

Brand	quadient
Model	IS-280
Category	Postal Equipment
Language	English