QualGear QG-KIT-VA-3IN-W User Manual

Version: November 2017
QG-KIT-VA-3IN-W
1 Year Limited Warranty
Scan the QR Code™ below
for more info about this product:
PROJECTOR MOUNTING KIT
CAUTION!
Do not exceed the maximum rated weight
specified. Otherwise, serious injury or
property damage may occur.
(70lbs)
32kg
Rated
(70lbs)
32kg
Rated
Slide projector assembly into the
projector plate until you hear a click.
Projector
Tighten the screws using Allen Key (H)
as shown on the right.
Allen Key (H)
Projector Mount
Projector Plate
Click!
11
Hanging the Projector Assembly onto the Projector Plate
7
gap

QualGear QG-KIT-VA-3IN-W Specifications

General

Brand	QualGear
Model	QG-KIT-VA-3IN-W
Category	Projector Accessories
Language	English

Summary

Parts Checklist

General Safety Warnings

Mounting to a Vaulted Ceiling

Mounting to a Vaulted Wooden Joist or Wooden Stud Ceiling

Instructions for mounting to wooden structures using stud finding, marking, and drilling pilot holes.

Mounting to a Vaulted Concrete Ceiling

Instructions for mounting to concrete ceilings using wall marking templates and expansion anchors.

Installing the Vaulted Ceiling Adapter

Pipe and Projector Plate Assembly

Joining the Pipe to the Ceiling Adapter

Connects the 3-inch NPT pipe to the ceiling adapter, allowing tilt adjustments.

Connecting the Pipe to the Projector Plate

Attaches the 3-inch NPT pipe to the projector plate using set screws.

Disconnecting the Projector Plate

Details how to slide the projector plate off the projector mount.

Mounting Adjustments and Attachment

Making Adjustment for Mounting

Adjusts extension brackets on the projector mount for optimal positioning.

Attaching the Projector Mount to the Projector

Secures the projector mount to the projector using screws and washers.

Hanging the Projector Assembly

Maintenance