- This menu is only for technical service personnel. It enables access by means of a password to a series of
menus in which we may configure and monitor the machine's parameters, aside from other types of functions.
7.2.1 – ONLY AUTHORIZED PERSONNEL
Consult function which includes two sub-menus:
- The first one is to check that the push button panels, work level probe and maximum level safety probe are
operating correctly.
- The second one shows us the instantaneous temperature of each group (only for Grouptronic models).
7.2 TECHNICAL PERSONNEL MENU
The default entry password
is “1234”. The technical
personnel should change
the password upon
installation.
Press to select and write
the password.
Press to confirm and enter
into the “Only authorized
personnel” menu.
Indicates the temperature which the
thermocouple is reading in each of the groups
(only for Grouptronic model machines).
Press to access the
next screen.
Indicates that
the safety level
for the water in
the boiler is not
in contact with
the water.
If communication between the button
panel and control unit is correct, upon
pressing a button, the icon will
increase its intensity and will show the
service which is being performed.
Indicates that the work
level for the water in
the boiler is in contact
with the water.
Flowmeter impulses are displayed when any of programmed
buttons are pressed.
To Next Page
Loading...
