Quality Espresso VISACREM V6 + User Manual

40
NEXT SCREEN
7.2.3 – PARAMETER
7.2 TECHNICAL PERSONNEL MENU
- The upper row is used to programme the temperatures of the water / steam
boiler and the temperature at which the left and right steam probes cut out.
- The lower row is used to calibrate the temperature probes, only if necessary.
Water / steam boiler temperature
Left steam cut out temperature
Right steam cut out temperature
W / S Boiler probe calibration
Right steam probe calibration
Left steam probe calibration
NEXT SCREEN
NEXT SCREEN
-The upper row is to programme the temperature
of each group.
- The lower row is to calibrate the temperature
probes, if necessary.
Temperature group 1 (left)
Temperature group 2
Temperature group 3
Temperature group 4
Probe adjustment group 1
Probe adjustment group 2
- Programming the maximum safety times,
the hot water times for teas, indication
mode (lighting of the button panels) and
the machine's installation date.
Safety time after which the left
steam will automatically stop.
Programmed time for hot water
for teas.
To modify the lighting mode of
the buttons, refer to section 5,
page 9, to change this via the
buttons.
Section for inserting the
installation date.
Safety time after which the
right steam will automatically
stop.
Press to select the value
to be changed.
When pressed, we modify the
value. 120ºC…121ºC…., etc.
Press to select the group, or
the probe to be changed.
When pressed, we
modify the value.
90ºC…91ºC…., etc.
Only for Grouptronic machines
Press to select.
Press to modify the value.
Probe adjustment group 3
Probe adjustment group 4
GB

Quality Espresso VISACREM V6 + Specifications

General

Brand	Quality Espresso
Model	VISACREM V6 +
Category	Coffee Maker
Language	English