Quality Heating QH - Page 32

2. Indicator light line is
cut
2. Contact customer
service
Water too
hot
Indicator light
on
1. Temperature set too
high
1. Reduce the set
temperature
2. temperature sensor
defective
2. Replace the
temperature sensor
No water
comes out of
the tap
Indicator light
on
1. Water supply clogged
1. Check the water supply
2. low water pressure
2. Wait until the water
pressure increases
3. inlet water valve
closed
3. Open the inlet valve
4. Joints blocked
4. Check and contact a
qualied plumber
Water
leakage
Inlet or outlet
pipe leaking
Pipe connection
problems
Contact a qualied
plumber
Tank casing is
leaking
Tank or accessory is
leaking water
Unplug the appliance and
contact customer service.