QUANTA D51B-2U User Manual

BIOS LOADING BIOS DEFAULTS
2-15
Loading BIOS Defaults
Different mechanisms exist for resetting the system configuration to the default values.
When a request to reset the system configuration is detected, the BIOS loads the default
system configuration values during the next POST. The request to reset the system to the
defaults can be sent in the following ways:
 Pressing <F9> from within the BIOS Setup utility
 Load BIOS defaults by jumper as follows:
1. Power down the system.
2. Move CMOS clear jumper from pins 1-2 to pins 2-3 for a few seconds.
3. Move CMOS clear jumper back to pins 1-2.
4. System automatically powers on.
5. Check BIOS defaults are loaded.

QUANTA D51B-2U Specifications

General

Brand	QUANTA
Model	D51B-2U
Category	Server
Language	English