EasyManua.ls Logo

Quantel Medical 577NM User Manual

Default Icon
107 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
XL SUP MT AN JUNE 2010
QUANTEL MEDICAL
Head office : 21, rue Newton, Z.I. du Brezet, 63039 Clermont-Ferrand cedex 2 - FRANCE
Tel : +33 (0) 473 745 745 - Fax : +33 (0) 473 745 700
E-mail :
contact@quantel-medical.fr Web site : www.quantel-medical.com
SERVICE MANUAL
532nm
OPHTHALMIC PHOTOCOAGULATORS
660 AND
810 nm
Directive 93/42/EEC
577nm
Question and Answer IconNeed help?

Do you have a question about the Quantel Medical 577NM and is the answer not in the manual?

Quantel Medical 577NM Specifications

General IconGeneral
BrandQuantel Medical
Model577NM
CategoryMedical Equipment
LanguageEnglish

Summary

Safety and General Information

Warnings and Safety Precautions

General safety rules, warranty information, and important usage notes.

System Classification and Hazard Warnings

Device classification, voltage hazards, and protective eyewear requirements.

Technical Specifications

Common Specifications Overview

General specifications for treatment beam, aiming beam, interface, and dimensions.

Model-Specific Laser Specifications

Detailed laser parameters for 532nm, 577nm, 660nm, and 810nm models.

Regulatory Compliance Standards

Applicable standards and directives governing the device.

System Architecture and Components

Block and Wiring Diagrams

Diagrams illustrating system architecture for various Supra models.

Accessories and Spare Parts Identification

Overall views, subsystem locations, and part codes for components.

Disassembly Procedures and Component Locations

Step-by-step guides for component removal and internal layout diagrams.

Connector Pinout Descriptions

Detailed pin descriptions for circuit boards and connectors.

Operation, Calibration, and Troubleshooting

Servicing and Calibration Procedures

Covers touch screen, service mode, curves, terminal, cavity, and aiming beam calibration.

Warning and Error Message Interpretation

Explains system warnings and error codes for diagnostics.

Diagnosis and Troubleshooting Guide

Criteria for optimal laser performance, curve analysis, and fault identification.

Fuse Replacement and Rear Panel Connections

Procedures for fuse replacement and rear panel plug identification.

Software Installation and Updates

Steps for software installation, configuration, and post-installation checks.

Service Cards and Validation

Using service cards for reporting issues and understanding the validation sheet.

Related product manuals