Quantum DXi V1000

Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-05 Rev B
April 2012
Other System Configuration CLI Commands 59
This CLI allows the admin user to set various OST global settings. At least one of
the settings must be specified.
CLI Command Options:
• --set: Sets the specified OST setting.
• --accent: If specified, turns the global accent setting on or off.
• --accentencryption: If specified, turns the global accent encryption setting
on or off.
• --accentencryptiontype: if specified, the accent encryption type will be
either 128 bits or 256 bits encryption.
Getting OST Global
Settings
syscli --get ostsetting
This CLI allows the user to get OST global settings.
Listing OST Global
Settings
syscli --list accentstats [--all]
This CLI provides a report of Accent statistics obtained from OST. By default, the
report will list the aggregate statistics of all media servers. If --all is specified,
the report consists of the aggregate statistics followed by the statistics of
individual media servers.
Other System Configuration CLI Commands
The following sections list other system configuration CLI commands:
• E-Mail Recipient CLI Commands
• Outgoing E-mail Server CLI Commands
• Sending a Test E-mail
• E-mail Home CLI Commands
• SNMP Trap Destination CLI Commands
E-Mail Recipient CLI
Commands
The following e-mail recipient commands are supported:
• Listing E-Mail Recipients
• Adding E-Mail Recipients
• Editing E-Mail Recipients
• Deleting E-Mail Recipients
• Deleting All E-Mail Recipients