Quantum DXi4700

Chapter 4: Configuration Wizards
Email Alerts Wizard
Quantum DXi4700 User’s Guide 103
Recipient Information Description
Name The name of the recipient.
Email Address The e-mail address of the recipient.
Notification Type Select the types of notifications to send to the recipient:
l High - Send e-mail notifications for High service tickets.
High service tickets indicate that a critical problem has occurred and
needs to be resolved immediately. The operation and performance of the
DXi4700 are degraded, and there is a risk of system failure or data loss.
l High and Medium - Send e-mail notifications for High and Medium
service tickets.
Medium service tickets indicate that a serious problem occurred and
needs to be resolved, but it does not necessarily need to be fixed
immediately. The operation and performance of the DXi4700 may be
degraded.
l All - Send e-mail notifications for High, Middle, and Low service tickets,
as well as any administration alerts.
Low service tickets indicate that a minor problem occurred and needs to be
resolved, but the operation and performance of the DXi4700 are not
significantly affected.
3. Select the Notification Enabled check box to enable sending of notifications to the recipient.
4. Click Add.
The recipient displays in the Email Recipient list.
5. (Optional) To add additional recipients, click Add and then repeat Steps 1–4.
To change a recipient, select it in the Email Recipient list and click Edit. To remove a recipient, select it
in the Email Recipient list and click Delete.
6. Click Next to continue.