Quantum DXi4700

Chapter 2: Basic Operations
DXi4700 Node
Quantum DXi4700 User’s Guide 41
Table 1: DXi4700 Node - Rear Panel Connectors
Item Indicator, Button, or
Connector
Icon Description
1
System identification button Press to toggle the system ID on and off.
The identification buttons on the front and rear panels
can be used to locate a particular system within a rack.
When one of these buttons is pressed, the system
status indicator on the rear flashes until one of the
buttons is pressed again.
2 System identification
connector
Not used.
3
iDRAC port For Quantum service use only.
4
Serial connector For Quantum service use only.
5
VGA connector Use of connected peripheral devices, such as a USB
keyboard and mouse or a VGA display, is not supported
and may cause incorrect system operation.
6
USB 2.0 connectors (2) Use of connected peripheral devices, such as a USB
keyboard and mouse or a VGA display, is not supported
and may cause incorrect system operation.
7
Service port For Quantum use only.
8
3 x 1 GbE Ethernet ports For data ingest/read.
9
Power supply (PSU1) 750 watt hot-swappable power supply.
10
Power supply (PSU2) 750 watt hot-swappable power supply.
11
vFlash media card slot Not used.