Quantum DXi4700

Chapter 4: Configuration Wizards
Configuration Wizards
Quantum DXi4700 User’s Guide 68
The Wizards menu includes the following wizards:
Wizard Description
NAS
(NAS and Multi-Protocol configurations only)
Helps you configure the DXi4700 as a NAS (Network
Attached Storage) appliance. NAS shares can be
added using the CIFS/SMB, NFS, or Application
Specific protocols (see NAS Wizard on the next page).
VTL
(VTL and Multi-Protocol configurations only)
Helps you configure the DXi4700 to present its storage
as one or more VTL (Virtual Tape Library) partitions for
use with a backup application (see VTL Wizard on
page 75).
OST
(NAS and Multi-Protocol configurations only)
Helps you configure the DXi4700 to present its storage
as one or more OST (OpenStorage) storage servers for
use with a backup application (see OST Wizard on
page 83).
Replication Helps you configure the DXi4700 to send replicated
data to or receive replicated data from another
DXisystem (see Replication Wizard on page 88).
Users Helps you configure the DXi4700 to manage users for
Application Specific shares, OST storage servers,
PTT Backups, Share Administrators, and Workgroup
Users for CIFS/SMB shares (see Users Wizard on
page 95).
Email Alerts Helps you configure the DXi4700 to automatically
send notifications and reports to selected recipients
(see Email Alerts Wizard on page 101).
Note: Before exiting the Wizards menu,
Quantum recommends configuring an e-mail
server and enabling automatic e-mails. To help
maintain system integrity, Quantum regularly
collects system information through automatic
e-mails. These e-mails contain configuration and
status information only, and do not contain any
customer data stored on the system
Support Helps you enable licensed features on the DXi,
register your system with DXi, and perform other tasks
that will aid Quantum customer support in assisting
you (see Support Wizard on page 105).
Click an item on the Wizards menu to begin a wizard. After you complete a wizard, a green check mark
displays next to its name on the Wizards menu. To display the main menu again, click Exit.