Chapter 4: Configuration Wizards
NAS Wizard
Quantum DXi4700 User’s Guide 70
Note: At any time while using the wizard, you can click Previous to return to the previous step.
Figure 41: NAS Wizard: About
Step 2: Windows
1. Select an option for joining the DXi4700 to the Windows network (see Figure 42 on the next page):
l Active Directory - Add the DXi4700 to a Windows network using Active Directory
l Workgroup - Add the DXi4700 to a workgroup on a Windows network
Note: To disjoin a domain, see Windows Domain on page 198.
2. In the Domain/Workgroup Name box, enter the name of the domain or workgroup the DXi4700 is
joining.
3. (Active Directory only) Enter information about the primary domain controller:
PDC Information Description
Primary Domain Controller Select an option for the Primary Domain Controller (PDC):
l Use DNS Discovery - Discover the PDC automatically.
l Specify Address - Enter the fully qualified name or the IP
address of the PDC.
Organization Unit (Optional) Enter the name of the organizational unit in the domain.
The DXi4700 will become a member of this organization
To Next Page
Loading...
