Chapter 4: Configuration Wizards
NAS Wizard
Quantum DXi4700 User’s Guide 73
Figure 43: NAS Wizard: Add Share
Step 4: Confirm
1. Review the settings you selected to make sure they are correct (see Figure 44 on the next page). If
necessary, click Previous to return to a previous step to make changes.
2. To make changes to a NAS share you added, first select the share and click Delete to delete the share.
Then click Previous to return to the previous step and add a new share.
3. After you have confirmed all settings, click Finish. The wizard configures the DXi4700 with the settings
you selected.
To Next Page
Loading...
