Chapter 4: Configuration Wizards
Users Wizard
Quantum DXi4700 User’s Guide 99
Fully Qualified User or Group Name Enter the administrator's user or group name.
2. Click Apply.
The user displays in the Share Access Summary table.
3. (Optional) To add additional Share Administrators, click Add and then repeat Steps 1–2.
To remove a Share Administrator, select it in the Share Access Summary table and click Delete.
4. Click Next to continue.
Figure 65: Users Wizard: Add Share Administrators
Step 3: Confirm
1. Review the users you created to make sure they are correct (see Figure 66 on the next page). The
users to be added display in the Authorized Backup Users Added. If necessary, click Previous to
return to a previous step to make changes.
2. To make changes to the users you added, click Previous to return to the appropriate step. Select the
incorrect user and click Delete to remove the user, and then add a new user.
3. After you have confirmed all users, click Finish. The wizard configures the DXi4700 with the settings
you selected.
To Next Page
Loading...
