Quantum DXi6900

Performing Initial Configuration
Quantum DXi6900 Installation Guide 70
1. Click the Open the Software Utility link.
The Software Upgrade Utility appears (see Figure 60 below).
Figure 60: Software Upgrade Utility
2. Click Check Now to check for available software upgrades.
3. Click Install to begin the software installation.
Wait for the system to fully restart. This can take up to 30 minutes.
Manually upload a software upgrade file
This option allows you to upload and install a software upgrade file on the DXi6900. Use this upgrade
method if the DXi cannot access the Internet.
1. Download the latest software upgrade file from the Quantum Service and Support Site:
http://www.quantum.com/serviceandsupport/index.aspx
2. Click Browse and select the software upgrade file on your computer downloaded in step 1.
3. Click Upload.
4. Click Start to begin the upload process.
Do not close the window until the uploading and unpacking process is complete. An Information
message displays stating the software upgrade file was uploaded successfully.
5. Click OK.
The Install Software Upgrade File page indicates that a software upgrade file has been uploaded
(see Figure 61 on the next page).