Quantum Q-Logic 3 User Manual


To change the Display settings:
1. Push the Home Screen button.
2. Push the joystick left to enter settings screen.
3. Push the joystick up or down through the
available setting subjects.
4. When the desired subject is highlighted on the
settings screen, push the joystick to the right to
enter that subject.
NOTE: At any time a left command will return
to the previous menu.
After "Display" is highlighted, a right command will
show.
After "Backgrounds" is highlighted, a right
command will show.
When a setting has a box, a right command
"checks" (enables that setting). Another right
command "unchecks" (disables that setting).
Home Screen


Backgrounds










Settings






Display













Quantum Q-Logic 3 Specifications

General

Brand	Quantum
Model	Q-Logic 3
Category	Remote Control
Language	English