Quantum Q-Logic 3 - Environmental Functions and Bluetooth; Enabling Environmental Functions via Bluetooth


To enable/disable and Environmental Function:
1. Push the Home Screen button.
2. Push the joystick left to enter settings screen.
3. Push the joystick up or down through the
available setting subjects.
4. When the desired subject is highlighted on the
settings screen, push the joystick to the right to
enter that subject.
NOTE: At any time a left command will return
to the previous menu.
After "Bluetooth operation" is highlighted, a right
command will show.
This Bluetooth screen will enable what
Environmental Functions are available on the
Environmental Functions Screen.
Home Screen
Bluetooth








NOTE: There are two Bluetooth screens: One is located under Settings and the other under
Environmental Controls.
Settings





