Release Notes
Document 6-01378-10 Rev A
October 2008
4 Compatibility Matrix
Compatibility Matrix 0
The following table provides information about library and tape drive firmware
compatibility with Scalar i500® i4 (520G.GS003). This information is current as of
the publication date of these release notes.
Component Firmware Version
Library Firmware 520G.GS003
Drive Types
IBM LTO-2 (Fibre) 8571
IBM LTO-2 (SCSI) 8571
IBM LTO-3 (Fibre) 85P8
IBM LTO-3 (SCSI) 85P8
IBM LTO-4 (Fibre) 85V1*
IBM LTO-4 (SCSI) 85V1*
IBM LTO-4 (SAS) 85V1*
HP LTO-4 (Fibre) H46Z
HP LTO-4 (SAS) A45Z
* Due to security features, you c
annot downgrade the IBM LTO-4
drive with brick code 82FB or later to previous code levels without
following specific instructions. If you must downgrade, contact
Technical Support for assistance.
Note: You mus
t run the Library Service Utility prior to upgrading
firmware if you are currently running firmware version
320G.GS004 or 400G.GS006.
To Next Page
Loading...
