Quantum Superloader 3 Manual

Quantum SuperLoader 3: Rackmount Replacement
6-68061-01 Rev A
December 2013
2 Preparing to Replace the SuperLoader 3 Rackmount
SuperLoader 3) will not exceed the current rating of the power distribution
unit or outlet receptacles.
5 Secure the help of at least one other person. At least two people are
required to safely reinstall the SuperLoader 3 into a rack cabinet.
WARNING: Failure to take these safety steps may result in personal injury
or equipment damage.
Caution: Never remove the top cover of the SuperLoader 3. Removing
the top cover could result in damage to the SuperLoader 3.
Required Tools and Kits Make sure you have the following tools.
• (1) #2 Phillips screwdriver
• (1) Level (required when placing SuperLoader 3 into the rack cabinet)
Make sure you have the following kits:
• Replacement Rack Rail Kit
SuperLoader 3
Replacement Rack Rail
Kit Contents
Verify the contents of the SuperLoader 3 Replacement Rack Rail Kit you received
from Quantum.
Table 1 SuperLoader 3 Rack
Rail Kit Contents
Component Description Quantity
10-32 x 1/4 inch button head screws 8
(4 per support
bracket)
Support brackets 2

Quantum Superloader 3 Specifications

General

Brand	Quantum
Model	Superloader 3
Category	Storage
Language	English