qubev EVON0010 - Electrical Specification; Certifications and Compliances; Unpacking; Typical Contents

Unpacking
QubEV QUBEV-UG-02 Installation and Operation Manual
Page 6 of 15 November 2020
Electrical Specification
EVON0010 EVON0040
Description
QUBEV Universal Socket EV Charging
Unit
QUBEV Universal Socket EV Charging
Unit
Rated Output Up to 7.2kW (32A)
Rated Current Up to 32A max
AC Overload Protection N/A 1x C40A MCB
AC & DC Fault Protection N/A Type B RCD
Charging Current Variable - 6A, 20A, 25A & 32A
Input Voltage 230V AC/50Hz (Single Phase)
Incoming Cable Terminals 3 x 16mm terminals
Overcurrent Protection Recommended 40A
Charging Socket IEC 62196 (Type 2)
Charge Protocol Mode 3
Certifications and Compliances
This product has been designed and built in accordance with the following standards and
legislation:
EV Charging Compliance EN 61851-1:2001, EN 61851-21:2002, EN 61851-22:2002
Wiring Regulations BS 7671
IET EV Regulations, Glow Wire Testing IEC 60695-2-13
EMC Compliance 2014/30/EU, EN 61000-6-3:2007, EN 61000-6-2:2005
Safety Compliance EN 60950-1:2006, EN 60950-22:2006
Low Voltage Directive (LVD) 2014/35/EU
Metal Enclosure (where supplied) EN 55014-1: 2006+A1: 2009+A2: 2011, EN 55014-2: 2016
EN 61000-3-2:2014, EN 61000-3-3:2014
EN 60335-1: 2012+A11: 2014
Switchgear (where supplied) EN 61543: 1995/+A11: 2003/+A12: 2005/+A2: 2006
EN 61008-1: 2010+A1+A2, EN 61008-1: 2012+A1+A2+All+A12
EN 61008-2-1:1990, EN 61008-2-1:1994+A11
EN 62423:2009, EN 62423:2012
Unpacking
The content of the package depends on any options or accessories that may have been selected.
IMPORTANT: Make sure all packaging is disposed of responsibly and in accordance with the
current regulations in your region.
Typical Contents
x 1 x EV Charging Device.
x 1 x Installation and Operators Manual.
x 1 x Fixing Template.
x 4 x Wall Plugs.
x 4 x Washers.
x 4 x Fixings.