QubicaAMF XLi - Front End Motor Brake and Encoder Replacement Parts

QubicaAMF XLi Pinspotter Motor and Gearbox Manual
400-088-038 21 Revision F
2.3.4 Brake and Encoder Replacement Parts
The following parts are available as replacement items separately from the motor. Failure of any of these
parts does not require replacing the motor and are easily replaced in the field. Any other warranty
replacement is done by replacing the motor. Below is a diagram showing these parts and a table listing the
part numbers.
Item #
Part Number
Description
1A
088-000-115
50-Hertz Motor (motor only)
1B
088-000-116
60-Hertz Motor (motor only)
2
088-000-028
Encoder Disc
3
088-000-029
Encoder Disc Spacer
4
088-000-022
Encoder/Home Sensor Assembly
5
817-921-060
Screw, 4-40 X ½, Phillips Head, Sems
6
088-000-030
Brake Hub 5/8
7
088-001-286
Brake & Splined Hub
8
907-200-080
Key, .80 X 1/16 Square
9
088-000-032
Encoder Enclosure
10
818-233-082
Screw, 8-32 X ½, Phillips Pan Head
11
805-133-020
Setscrew, 8-32 X 1/8, 5/64 Hex Socket
12
810-233-060
Screw, 8-32 X 3/8, 9/64 Hex Socket Cap
7
1A
1B
50 Hz
60 Hz
12