QubicaAMF XLi Pinspotter Motor and Gearbox Manual
400-088-038 37 Revision F
3.3.12 Repair Parts and Kits
*All part numbers can be purchased individually.*
Seal Kit, 612-088-217
This kit includes one replacement seal for each shaft (enough for one gearbox).
088-004-617 – Oil Seal, PBL/Distributor Shaft (x2)
088-004-627 – Oil Seal, Input Shaft
088-004-658 – Oil Seal, Elevator Shaft
Seal Replacement Kit, 612-088-216
This kit includes everything necessary to change the gearbox oil and replace the oil seals. The oil must be changed
every time the seals are replaced, and vice versa.
715-012-505 – Seal Grease
088-004-617 – Oil Seal, PBL/Distributor Shaft (x2)
088-004-627 – Oil Seal, Input Shaft
088-004-658 – Oil Seal, Elevator Shaft
088-004-635 – Drain Plug
Seal Tool Kit, 612-088-218
This kit packages all of the seal installation tools together.
088-004-662 – Elevator Shaft Seal Tool
088-004-659 – Input Shaft Seal Tool
088-004-660 – PBL/Distributor Shaft Seal Tool
Coupling Kit, 612-088-219
This kit includes the following:
Coupling Assembly
Coupling Installation Directions
Template/Gauge (Used in installation of coupling assembly to motor shaft)
Vent Plug Kit, 612-088-220
This kit includes the following:
Vent Plug
Vent Plug Installation Directions
Gearbox Accessory Kit, 612-088-225
This kit includes all items from both the Coupling Kit (612-088-219) and the Vent Plug Kit (612-088-220).
Repair/Replacement Parts
793-513-048 – Torque Wrench (250 in-lbs.)
780-503-015 – 4mm Allen Hex 3/8” Socket
715-022-505 – Klüber Gearbox Oil (Liter)
715-022-516 – Klüber Gearbox Oil (20 Liters)
715-012-505 – Klüber Seal Grease
907-201-000 – Square Key 0.19 X 1.25 (Elevator Shaft)
907-200-500 – Square Key 0.13 X 0.75 (Distributor Shaft)
907-202-600 – Square Key 0.19 X 1.88 (PBL Shaft)
Coupling Assembly Parts:
088-004-666 – Spider
M5 X 25mm, Gr 8.8, 4mm Allen Head Cap Screw
M5 Belleville Washer
M5 Hex Finish Nut
Dowel Pin
Coupling Casting
To Next Page
Loading...