QUBINO Smart meter User Manual

EN.
38
Parameter no. 11 – Automatic turning off External IR relay output after set time
When External IR relay is ON it goes automatically OFF after time defined in this parameter.
Timer is reset to zero each time the device receives ON command.
Values (size is 2 byte dec):
 Default value 0
 0-59 = Auto OFF disabled
 60-32535 = 60 seconds – 32535 seconds
Parameter no. 12 – Automatic turning on External IR relay output after set time
When External IR relay is OFF it goes automatically ON after time defined in this parameter.
Timer is reset to zero each time the device receives OFF command.
Values (size is 2 byte dec):
 Default value 0
 0-59 = Auto ON disabled
 60-32535 = 60 seconds – 32535 seconds

QUBINO Smart meter Specifications

General

Communication Protocol	Z-Wave
Weight	150 g
Rated Current	65 A
Accuracy	Class 1
Frequency	50/60 Hz
Radio Protocol	Z-Wave
Power Consumption	< 1 W
Z-Wave Frequency	868.42 MHz (EU)
Range	Up to 30 m indoors
Operating Temperature	-10°C to +40°C