EN.
39
Parameter no. 13 – Automatic turning off External relay output after set time
When External IR relay is ON it goes automatically OFF after time defined in this parameter.
Timer is reset to zero each time the device receives ON command.
Values (size is 2 byte dec):
Default value 0
0-59 = Auto OFF disabled
60-32535 = 60 seconds – 32535 seconds
Parameter no. 14 – Automatic turning on External relay output after set time
When External IR relay is OFF it goes automatically ON after time defined in this parameter.
Timer is reset to zero each time the device receives OFF command.
Values (size is 2 byte dec):
Default value 0
0-59 = Auto ON disabled
60-32535 = 60 seconds – 32535 seconds
To Next Page
Loading...