Quectel BG950A-GL - Reference Design

LPWA Module Series
BG950A-GL&BG951A-GL_Hardware_Design
57
/ 84
Table 35: Conducted RF Receiving Sensitivity of BG951A-GL
5.1.4. Reference Design
It is recommended to reserve a π-type matching circuit for better RF performance, and the π-type
matching components (R1, C1 and C2) should be placed as close to the antenna as possible. The
capacitors are not mounted by default.
14
LTE Cat NB2* receiving sensitivity without repetitions.
Frequency Band
Primary
Diversity
Sensitivity (dBm)
Cat M1/3GPP
Cat NB1
14
/3GPP
LTE HD-FDD B1
Supported
-
TBD/-102.3
TBD/-107.5
LTE HD-FDD B2
TBD/-100.3
TBD/-107.5
LTE HD-FDD B3
TBD/-99.3
TBD/-107.5
LTE HD-FDD B4
TBD/-102.3
TBD/-107.5
LTE HD-FDD B5
TBD/-100.8
TBD/-107.5
LTE HD-FDD B8
TBD/-99.8
TBD/-107.5
LTE HD-FDD B12
TBD/-99.3
TBD/-107.5
LTE HD-FDD B13
TBD/-99.3
TBD/-107.5
LTE HD-FDD B17
12
-
TBD/-107.5
LTE HD-FDD B18
TBD/-102.3
TBD/-107.5
LTE HD-FDD B19
TBD/-102.3
TBD/-107.5
LTE HD-FDD B20
TBD/-99.8
TBD/-107.5
LTE HD-FDD B25
TBD/-100.3
TBD/-107.5
LTE HD-FDD B26
13
TBD/-100.3
-
LTE HD-FDD B27
13
TBD/-100.8
-
LTE HD-FDD B28
TBD/-100.8
TBD/-107.5
LTE HD-FDD B66
TBD/-101.8
TBD/-107.5